You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2961 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, October 10th 2010, 6:02pm

by mrfixit

Do you get a display with a new battery installed? If not I'd say the controller's fried. With that said, did you take the battery out if there is one? To reset the controller you need to unplug it and take the battery out. Let it sit for 5 minutes.

Good luck!

Sunday, October 10th 2010, 2:56pm

by william62949

Toro Greenkeeper

My Toro Greenskeeper controller does not show anything in the digital display. I have unplugged the transformer and checked the voltage and its correct. I have taken the fuse and checked it, and it is good. I have checked across the terminals of the fuse holder and voltage is crossing here. I dont know what else to try. I have also checked the outlet where the transformer is plugged in and house voltage is there. :(