You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1292 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 11th 2011, 2:36pm

by Sprinkler Buddy

RE: Digging out sprinkler heads


I recently bought a house that has a 10 year old or so system. The lady who owned it didn't do any maintenance and I'm noticing some problems. A lot of the heads are leaning. I found some hiding under overgrown shrubs. Some are shooting directly into the grass -- the grass has grown above the heads (prob a result 10 years of mulching grass). Should I dig out the grass surrounding the head or attempt to add risers? Also, I've noticed a lot of sand in the soil around the heads. Is this the recommended fill around a head? Lastly, there's a hodgepodge mix of brands, even within zones: Rainbird, Champion, Hunter and some other brand I can't read. Even though they are the same type (either spray or rotor) within a zone, is this a problem? Thanks

Congrats:

I would use risers to bring the sprinkler heads back up to their proper height. The root base of a lawn will often become higher overtime, that is common with FL yards. Sand around the heads are one of two things. 1. Sprinkler inner parts are worn. 2. You may have a leak or a broken riser at the water source and it boils water up the sprinkler head shaft. Different heads not a major problem but I would replace them all with the same brand of your choice as they wear out. Many are leaning from the dirt not being compacted around them. Causes are the above mentioned or they also are getting wacked by the mower tires. Enjoy your new yard!

Wednesday, September 22nd 2010, 5:56pm

by subopt

Digging out sprinkler heads

I recently bought a house that has a 10 year old or so system. The lady who owned it didn't do any maintenance and I'm noticing some problems. A lot of the heads are leaning. I found some hiding under overgrown shrubs. Some are shooting directly into the grass -- the grass has grown above the heads (prob a result 10 years of mulching grass). Should I dig out the grass surrounding the head or attempt to add risers? Also, I've noticed a lot of sand in the soil around the heads. Is this the recommended fill around a head? Lastly, there's a hodgepodge mix of brands, even within zones: Rainbird, Champion, Hunter and some other brand I can't read. Even though they are the same type (either spray or rotor) within a zone, is this a problem? Thanks