You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3961 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Tuesday, August 14th 2007, 4:13pm

by daniels

I rebuild and repair Toro Custom and Monitor II controllers. My email is

Sunday, April 30th 2006, 5:23pm

by SprinklerGuy

No problem..I have been meaning to call him and have not yet done so...he is a very knowledgable man....good luck.

Sunday, April 30th 2006, 12:23pm

by dealzone

Hi Sprinkler guy,

Ispoke with Mr. Bill and he says that it's been a couple of years and he sends his fondest regards. Yes he has exactly what I need and he understood my problem and issues immediately



Monday, April 17th 2006, 1:33pm

by SprinklerGuy

My great friend in Arizona makes something that just might help you...and I believe he will ship it out...and give instruction for a fee....much cheaper than conversion.

Here is his website..his name is Bill...please tell him Tony Neumann in Colorado sent you....

good luck

Monday, April 17th 2006, 8:30am

by Wet_Boots

Unless you're running on a secondary water supply, you may have more than just a timer to worry about. The vast majority of hydraulic-controlled sprinkler systems have no backflow protection. The breakdown of the hydraulic controller would present you with the opportunity to change to electric valves and a modern controller. If the new valves are the antisyphon type, those would give you the backflow prevention a sprinkler system needs.

Monday, April 17th 2006, 6:37am

by dealzone

Toro Custom Eight Controller Broke - Help!!

I have no sprinkler experience so here goes. My TORO timer is a Custom Eight Model# 123-01-12 Serial # A39541 and the timer no longer works. I canb perate the timer by turning it physically. The system is "hydraulic" based and the local TORO dealer is quoting everyone in my subdivision $3,000 to $5,000 to convert it to electric. I'm thinking that's not going to work for me. So what can / should I do. Are there used controllers out there / conversion kits or a timer brand that can mechanically turn the wheel that my existing timer no longer does automatically.