You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1480 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Sunday, September 12th 2010, 9:02am

by jmricker

I've seen pipe put together with just primer that you just can't get apart. He may have mistaken that for a glued joint. As a plumber I've seen this happen a time or two (people in haste primer a joint but forget to glue). Of course they eventually leak - thats how we discover that they were not glued in the first place.

Another thought crossed my mind -- the neighbor isn't confusing purple primer for blue glue is he?

Joel

Tuesday, September 7th 2010, 3:44pm

by HooKooDooKu

PVC pipe and their fittings are designed for a snug fit, and using primer helps make that snug fit even tighter. So I can believe that he managed to put everything together, did a quick pressure test, and everything was fine. But without glue, over time, the stress the water pressure and the turning the water on and off WILL cause the pipes to move, loosen, and leak.

Though it begs the question how a DIY did a whole system without ever needing to ask any questions or read any instructions that would have clued him in that "PRIMER" is NOT "GLUE".

Friday, September 3rd 2010, 11:24am

by Wet_Boots

I once saw a DIY system that had lots of pinhole leaks on the interior PVC plumbing joints, that the homeowner tried to patch with epoxy putty. He told me that his friend "had assured him that there was no need for primer" when assembling PVC. Too bad his friend was an electrician and not a plumber.

Thursday, September 2nd 2010, 7:46pm

by hi.todd

I would also be concerned if I installed a sprinkler system with out cement or glue.

:thumbsup: :thumbup:
Maybe he can show a container of exactly what he did use.

Thursday, September 2nd 2010, 6:52pm

by Fireguy97

Tell him to get pictures! It should be a riot! Little gushers all over his yard! - and he'll never really know if he ever got them all.

Mick

Thursday, September 2nd 2010, 6:41pm

by Central Irrigation

So you're saying he used only primer and NO glue? He will definitely have a problem!

Thursday, September 2nd 2010, 5:08pm

by stanleyB

Purple Primer used instead of 'glue".






Recently a friend came by as I was doing some work on my sprinkler system and noted that I was using both the purple primer and the clear "glue". He Is now a bit concerned as he says he thought the 'purple stuff' was a glue and did put together his own sytem at his home using only it. He says he did before burying most joints put them under presure to check the bond for leaks, all seemed fine, and has seen no leaks since then. Does he have a real problem?



Thank you




Stan