You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3032 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Sunday, August 29th 2010, 6:49pm

by BillyV (Guest)

It's definitely the mist from sprinkler.

Sunday, August 29th 2010, 6:46pm

by mrfixit

Are you positive it's the sprinkler making the mud or could it be a leaky valve?

Sunday, August 29th 2010, 4:46pm

by Fireguy97

Your best bet is to find an Irrigation Contractor, or a contractors supply house that carries Toro commercial products. They should have a nozzle set that you can use.


Sunday, August 29th 2010, 4:41pm

by Fireguy97

Toro, as well as manafacturers of other rotor heads has a shut-off feature on some of the 'higher-end' heads. The feature will turn the entire head on or off. To change a part of the nozzle - the mist portion, and turn that off, is not possible. You should be able to change nozzles for a different pattern, and possibly a different gallonage per minute.


Sunday, August 29th 2010, 4:22pm

by worachj

Sounds like a MultiStream head. You can try and play around with the radius adjustment and see if that lessens the amount of water that is sprayed close to the head. I don't know of a way to kill one of the streams on a MultiStream head.

Click on the rotor link.…r_systems/30032

Sunday, August 29th 2010, 3:33pm

by BillyV (Guest)

toro adjustment

I have toro rotary head that was installed on the infield of my softball field. It looks like it has "D30" on top. Not sure if that is the model. It has 3 water nozzles--a long arc, a short arc, and then a short, flat mist spray. I want to stop flow to the mist spray because it makes a muddy mess around the head. Any way to do this? Thanks!