You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3131 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Wednesday, March 29th 2006, 3:19pm

by king-bug

Cut the wire while shovelling out the garden... Fixed it... Thanks to your advice!

Tuesday, March 28th 2006, 1:52am

by SprinklerGuy

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"> recently cleaned out my front porch garden <hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

I'm guessing you cut it or dislodged it somehow..should be easy enough to find now that the garden is "cleaned" out.

Good luck, post more info if necessary.

Monday, March 27th 2006, 7:46pm

by BSME

I'm just wondering if the whole valve box is not working or if it's just 2 of 5 or something.

I gotta believe the wire is cut somewhere...

If the solenoids are new and they will buzz when you put them on the terminals at the timer the problem has to be between the two...

if it's just two of more valves in that box you should check to see if one of your wirenuts to the common is loose

Monday, March 27th 2006, 6:30pm

by BSME

How many zones are in that front valve box?

Monday, March 27th 2006, 6:28pm

by king-bug

2 zones in front yard not working...

I recently cleaned out my front porch garden where the sprinkler solenoids are located but were covered by the plastic cap... So after cleaning out the garden, the sprinklers worked great but now nothing... the solenoids are not clicking (or the water heater isn't giving that click as the valve opens...)

I changed the solenoids in the front 2 zones but no response to the controller although as i removed the solenoids the zones worked until i shut off the valves to each zone... so i think it's electrical... not the solenoids & the water connection/pressure seem to be in good order...

What do i do... COuld the wiring be cut under the house?