You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2875 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, August 10th 2010, 3:07pm

by mrfixit

Reset the controller. Look for a blown fuse. Make sure you hooked the wires up correctly to the new valve if it happens again.

Monday, August 9th 2010, 8:09pm

by kevinmdevil91 (Guest)

Off message

I just replaced a bad solenoid valve and now the controller shows "off" and will not change/come to life when I move to try and turn it on to water. Everything is plugged in and I cannot tell why the controller seems to have died. The whole system worked fine earlier today before the valve went bad and I could not get the water to stop without using the shut off valve and replacing the solenoid. Any ideas