You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2552 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, June 1st 2011, 9:15am

by outdoorjunkie (Guest)

Have you tried replacing the battery for a new one?

Sunday, August 8th 2010, 5:32pm

by csc616

programing trouble on rainbird esp-m controller

I have been using the esp-m all summer long and have had no issues until I turned the timer to off for a day to fertilize.
I went to put it back to auto and it shows a alarm. It says I have no start times. I went in and reprogrammed the system and keep getting the same error. The controller will allow me to change the values but as soon as I turn the selector dial they seem to go back to a default setting. I am having the same trouble with start time, run time, seasonal adjustment and pretty much every other setting on the controller.
I have reset, unplugged, pulled the battery and even beat it up a little and still nothing.
any help would be appreciated