You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2857 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, August 28th 2010, 5:32am

by kenken1955 (Guest)

ERR on Pro-C

I just tried that. Seems to run OK. When I touch the white wire back to the original point of contact, you can see a very very small spark, like it's feeding back through the ground?

Friday, August 6th 2010, 4:33am

by mrfixit

I think it's the wiring. Try disconnecting the ground wire from the controller and let it run through it's regular programming. I'm betting you wont get an err code.

Thursday, August 5th 2010, 10:55am

by kenken55

Err Codes on Pro-C

I have been getting err codes on my Pro-C. Started last summer. When I got the first one this spring, an err 6, I had a company come fix it. They replaced the #6 solenoid. Worked great for months. Then I got an err 1. They replaced the #1 solenoid. They also suggested replacing the rest of them should I get another err code. Got one and then replaced all the solenoids. Just got an err 3 this morning. When I run the diagnostics, I can't get an err code. All zones work fine when testing. I'm starting to think it's the Pro-C itself. Any ideas?