You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1542 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Monday, August 2nd 2010, 5:08am

by Wet_Boots

If no one has Irritrol adapters, you can do okay with a consumer version of their 623 (Richdel) adapter, that carries the Lawn Genie name

Saturday, July 31st 2010, 5:16pm

by mrfixit

I'm not aware of any Superior valve looking identical to an Irritrol valve so I went to the Superior site.

www.superiorcontrolsco.com/product_main.html Click on automatic adapters then 600. If this is the valve you purchaced, I'd take it back. You will not be happy with it. I have a box of those in my garage I wont even install them for anyone. They'll leak and will stop working. It's a horrible product in my opinion.

P.S. go ahead and turn your pressure back up to 70.

Saturday, July 31st 2010, 4:56pm

by Wet_Boots

Both the Irritrol models are reliable. They have more than one because of acquiring other companies.

-

Getting really obscure here, but if the brass valves these are going into are not Champion brand, then the threads might not match up.

Saturday, July 31st 2010, 2:41pm

by bigsee

Went to Ferguson because the Irritrol web site says they carry the 300 valve, but of course they don't -- they only had Superior, which looked identical to the Irritrol -- no threaded plastic piece! So I put that on and it is working well. I also got a hose-bib pressure gauge and it looks like the pressure was more like 70 -- high, but the Orbit literature said no higher than 80 so I still don't get why it blew. I adjusted it down to 65, the sprinklers are a bit anemic now but the coverage is there. I'll post again if the Superior blows apart -- and thanks again to all the helpful advice, I remember the days before the Internet and help forums, you either spent an entire weekend (or week) doing trial-and-error or you paid a pro big $$$ to sort it out . . .

Saturday, July 31st 2010, 12:11pm

by bigsee

Thanks for the advice. I pulled off the Orbit converter today and the threads on the inside plastic portion were just shredded away. I can't figure out what would do it because the pressure is below what they recommend, but I'm DONE with these Orbit products. I'm going to Ferguson and will get an Irritrol 300 as suggested and report back if it fails too. Thanks again.

Friday, July 30th 2010, 6:45pm

by Wet_Boots

There was one problem I remember with the original converters made by Richdel for the Champion brass valves, and that was when someone tried to "align" the covers with each other, by rotating them. That act of rotating the top of the converter would weaken something inside, and the converter would later separate much as described here. Moral of the story is, don't worry if the converters don't all line up neatly. All they have to do is work.

Friday, July 30th 2010, 3:57pm

by mrfixit

I find it strange that those valves are coming apart with only 55 psi. If you've tightened the threads where it came apart with a wrench that could cause the problem. Once those plastic threads are damaged that's all she wrote. The valve is damaged beyond repair. You can screw it back together but it will come apart again. Irritrol had that problem with the 2623DPR series. www.irritrol.com/valves/valves_2623dprs.html They've since redesigned the threads making them bigger. Since then I haven't seen one blow apart.

Here's a valve that's very reliable. It doesn't have the threads to come apart. The bottom is one piece. This valve should make you happy. The Irritrol 300. www.irritrol.com/valves/valves_300s.html

Friday, July 30th 2010, 1:24pm

by bigsee

Buy better convertors. Do you know what your water pressure is?
OK, can you recommend a better converter? I had Champion brass ones and I had lots of trouble with them over the years.

The pressure is 55 psi.

Friday, July 30th 2010, 12:38pm

by Wet_Boots

Buy better convertors. Do you know what your water pressure is?

Friday, July 30th 2010, 11:39am

by bigsee

Orbit 57029 Automatic Converter keeps failing

I replaced some old brass actuators with Orbit Automatic Converters (www.orbitonline.com/products/Valves/02/16/10/621/). They work great, except they keep blowing apart where the brass portion screws into the plastic body. The sprinklers won't turn off and I come out to find a fountain of water coming out from the bottom side of the converter. I screw it back together but then it just comes apart again when under pressure.

I installed a pressure regulator on the line, thinking it would solve the issue, but it's started happening again. At this point I am prepared to just go back to brass valves but if anyone has any solutions I would really appreciate it. i am tired of fiddling around with my sprinkler system!

Thank you.