You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3195 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, March 19th 2006, 8:24pm

by lush96

lol. always shut off water supply when changing or repairing valves. contents under pressure

Friday, January 27th 2006, 8:17am

by Tom

yes will shoot out the orifice...........usually in your eye............

Friday, January 27th 2006, 7:18am

by arizona_rancher

Thanks for that, solenoid was replaced and operates as required when zone is powered. Should their be water under pressure exiting from solenoid orifice once removed from valve?
[?]

Thursday, January 26th 2006, 5:21am

by Wet_Boots

The wiring might be faulty, and you need to check its resistance.

Wednesday, January 25th 2006, 1:28pm

by arizona_rancher

zone not working

I have 1 zone out of 4 not working. I found that (one) solenoid valve had the wiring exposed in many places. VOM showed that solenoid had high resistance. In addition all zones are receiving expected voltage.
I have replaced solenoid but zone still does not work. When solenoid was removed, water was flowing out solenoid orofice, does this indicate diaphram has ruptured? If so, is it possible to just replace it or does entire in-line valve have to be changed?

I do not know MFG of system either.

Thanks [8D]