You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1499 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, July 14th 2010, 10:38pm

by mrfixit

That's what I get for assuming. If these are the inline version then definetly get rid of them. The seat on those valves likes to crack. It's a high percentage of the inlines that I've uninstalled which had cracks.

Right, you need 5 inches between the valves for the adapters to fit.

Wednesday, July 14th 2010, 10:07pm

by bmeier

Thanks for the help. No arguing that it's a piece of junk. May just have to replace it. According to the measurements on the web site it won't fit in the valve box.

Monday, July 12th 2010, 3:30pm

by mrfixit

Hi I can identify that piece of junk for you. It's a Rainbird APAS-100. I notice the yellow/brown plastic ring is missing. Look inside the valve. It's probably in there. You'll need to get that out before attempting to repair it. The guy is right. You need new valves or you can replace the part in your picture with the valve in the link below. Trust me it works. I discovered this about 15 years ago and never had a problem. I only do this from time to time to save the home owner money if the repair is difficult to get to or galvanized or whatever.

You'll need the 1".

www.irritrol.com/valves/valves_300s.html

Monday, July 12th 2010, 1:42pm

by bmeier

Idenify Rainbird Valve and Suggestion on how to fix.

Was wondering what type of valve this is and where/if I can find
replacement. It won't close all the way. I have taken it apart and
cleaned it up and still doesn't close all the way. No luck find any
replacement parts at Home Depot or a local distributor. The local guy
said replace all the valves, and was hoping avoid this if possible.

http://www.flickr.com/photos/32136286@N04/4786980853/

Thanks