You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4567 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, December 22nd 2005, 1:14pm

by Wet_Boots

The Imperial Valet runs on 110 volt circuitry, so it's not a controller to casually play around with. Are the threaded timer pins at all loose? They have to be firmly in place to activate the microswitches, and those microswitches are one item to consider as being responsible for a malfunction such as you describe.

Thursday, December 22nd 2005, 11:31am

by Bob Clarke

Imperial Valet Timer sick

I have a Imperial Valet timer with 11 stations. My problem is the timer will not start the automatic cycle. The clock works fine, I can turn on the valves either semi automatically and manually. I noticed the reset button will not stay in. I checked each station for a short with no results. Could use some advise or who might handle diagnosing my problem here in Fullerton, Ca.

Thanks Bob