You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1573 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, July 4th 2010, 6:23pm

by mark321

I think the problem has been fixed. The filter in line with the irrigation source and the sprinkler system was pretty clogged with debris. I cleaned it out and the pressure seems higher, I will monitor it and see if this was the problem.

Saturday, July 3rd 2010, 2:49pm

by mark321

Thanks for the reply. The sprinkler heads are Rainbird Maxi-Paw model 2045A like this :

http://www.rainbird.com/images/products/diy/rotors/AG5MaxiPaw_ActionCloseup.jpg

Saturday, July 3rd 2010, 7:26am

by Wet_Boots

What make and model of heads? (take some photos)

Saturday, July 3rd 2010, 12:02am

by mark321

Rotating heads not rotating

I recently moved into a house with an underground sprinkler system and am having a problem with the sprinklers not behaving correctly. The system is on an automatic timer and has a total of 5 zones with 4 zones each consisting of 4 Rainbird pop-up heads and 1 zone having mister nozzles. The home was built in 2004.

The problem is that some of the pop-up heads do not rotate when the timer switches to their zone, unless I manually close the main water valve from the irrigation pipe and then re-open it. All heads do pop up, but don't rotate around and instead stop at some point in the coverage arc. When I manually close the main water source and re-open it, all sprinklers in the active zone then work as they should for the duration of that zone. Otherwise it seems to be sort of random as to when they stop rotating. When the timer switches to the next zone, it may rotate for a few moments but then seems to consistently stop rotating.

I'm new to underground sprinkler systems (my other homes did not need them), so any advice or suggestions would be greatly appreciated.

Thanks,
Mark