You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2918 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, June 27th 2010, 10:19am

by PCPopcorn

That was it!

maybe you installed the valve backwards

I wish there were arrows on this valve like on the 1" valves.No directions and toro's site was incomplete.

All working now Thanks for the reply.

Saturday, June 26th 2010, 5:55pm

by Wet_Boots

maybe you installed the valve backwards

Saturday, June 26th 2010, 1:43pm

by PCPopcorn (Guest)

My Toro system is working backwards

I have a 2 valve system and my 1" valve is working fine.I just installed a 2" valve Toro 252 Series Control Valve 2inch with Flow Contro and I am using a Toro Lawn Master 2 controller.

The 2" valve will only open when I turn the controller off.

I am running a common wire from the controller to 1 lead on each valve.

The other lead eithe goes to S1 or S2

Any ideas?