You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1560 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Tuesday, June 15th 2010, 5:25pm

by Wet_Boots

You could stand to have more pressure, since 42 psi at the pump will mean maybe 10 psi less at the heads. You might try smaller nozzles and see what that does for the pressure.

Tuesday, June 15th 2010, 5:59am

by martyjnort

sprinkler heads

There is one head that is staying up after the zone has ended the cycle and keeps spraying water the other three are shutting off. Thanks , Marty

Tuesday, June 15th 2010, 5:54am

by martyjnort

sprinkler heads

pump pressure is at 42 PSI

Monday, June 14th 2010, 12:11pm

by Wet_Boots

What's the pressure on the zones where the heads are not turning?

Sunday, June 13th 2010, 7:04am

by martyjnort

sprinkler heads not rotating

I changed the nozzles and they were working fine with a smaller nozzle. Now 3 of the 13 sprinklers are running but not rotating. Thanks , Marty

Sunday, June 13th 2010, 6:29am

by Wet_Boots

a Toro TR-50 head is just like any other modern rotor head - you need to install the proper nozzles in order for it to match up with the well water supply.

Saturday, June 12th 2010, 9:21am

by martyjnort

had

Saturday, June 12th 2010, 9:19am

by martyjnort

I ordered the heads and $500.00 worth of other items per the instruction of the expert. I hab no clue about the heads and trusted him. Marty

Friday, June 11th 2010, 7:42pm

by mrfixit

I have a question. You said someone else installed the wrong heads then you said you recieved parts from Sprinklerwarehouse. Who picked out the heads. You or the expert?

Friday, June 11th 2010, 1:38pm

by martyjnort

Toro sprinkler head

I recently had 12 Toro TR 50 P sprinkler heads installed by a so called expert. After the installation of a 3 zone system 5, 4 & 4 heads the system starts out strong but slows down after 10 seconds. I was told it was the pump and then told it was the well. I called in an expert and was told that the guy installed the wrong heads and that they were for a golf course and the pump and well are fine. The pump pressure is 45 PSI. Do I need new sprinkler heads or is it possible to change the parts i received from sprinkler warehouse. Thanks, Marty