You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1507 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, June 12th 2010, 1:17pm

by mrfixit

Could be the rain sensor itself. Try bypassing it and see what happens. Go look. It should be self-explanatory how to do it.

Saturday, June 12th 2010, 6:36am

by Wet_Boots

Get out your multimeter and start in measuring resistance of your wiring, so you know what is what.

Friday, June 11th 2010, 8:56pm

by 458

TORO Sprinkler system worked last summer but will not come on this year.

I have a TORO sprinkler system. It worked fine last year but the sprinkler do not run this year on any of the 8 stations. I had someone come out and check it and if they attach this solenoid Activator to each station they run fine but they do not run connected to the Controller box. Also Station One always runs no matter which other station we try to run using the Solenoid Activator. The other issue that I have seen is that I had a Rain/Freeze sensor attached to the Sprinkler system a few years ago and the wires that connect it to the wire in the ground had been cut but these people connected these wires but in a very crude fashion. A) Given the above scenario is the Controller box bad (the sprinkler guy thought that it was ok but I am not so sure) or B) Are the split wires connecting the Rain sensor causing the whole system to not work. Thanks for the help. ?(