You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2943 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, June 2nd 2010, 6:07am

by Wet_Boots

if you want to do this right, get out the axe

Monday, May 31st 2010, 10:00pm

by mrfixit

Cut off risers work well. You'll have to cut and paste this link in the address bar. off riser&Ntk=i_products&pl=1&currentURL=/pl__0__s?newSearch=true$Ntt=cut off riser

Monday, May 31st 2010, 4:50pm

by timcreech

Sunken Popups

I have several popups that have sunken 1-3 inches over the years. Normally I would dig them up and put some cut to length riser, but these are all entangled in root and it could be a long difficult battle to get to the bottom.

Are there any "risers" that I can attach on the top side at the head?