You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2943 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Thursday, May 27th 2010, 1:53pm

by Wet_Boots

They still make the Toro 300 series. If you have an old head that stopped turning, you can actually replace the gear drive and put it back in service. The 340 as packaged with the 'Omni' nozzle isn't so good a match for the 02 nozzle, because it uses more water, even with the distance adjusted down to match the 02 nozzle.

Thursday, May 27th 2010, 1:47pm

by mrfixit

This sprinkler will be a good 1/2" taller than the old style.

The nozzle is adjustable. No need for 1-2-3 anymore.

If the sprinkler you have now is just leaking or not spraying properly you can just change the insert and nozzle.

Thursday, May 27th 2010, 6:17am

by teeshrtman

toro sprinkler

I need to replace a toro rotor # 300-02 series. What do I replace it with?