You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3101 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, May 17th 2010, 10:08am

by Moose

Thank you all very much for the info....we thought the same thing, but wanted add'l input.....:)

Sunday, May 16th 2010, 12:31pm

by mrfixit

I don't think the RainDial has a fuse you can replace.

There is a wiring harness that can come loose. Look behind the faceplate. Same place where the back up battery is.

If you're still having problems I'd dump the controller. I've had to replace 3 RainDials the past 6 months. All over ten years old.

I recommend you replace it with the Hunter Pro-C.

Sunday, May 16th 2010, 12:01pm

by OSLSprinkler

with the on screen problems, the timer seems to be on the way out. Did you check out the fuses inside the timer? A blown fuse will prevent the system from running.

Saturday, May 15th 2010, 9:09pm

by Wet_Boots

If you are satisfied that the wiring and valves are in good order, what's left but the controller/

Saturday, May 15th 2010, 12:53pm

by Moose

No stations work using controller...time to replace???

We have nine valves/stations on a 12 station outdoor raindial controller. There is power to it, but the clock has not kept good time for a long time now, and it fades in and out, and when trying to enter new data, it jumps all over the place (time,minutes, etc). PROBLEM, all nine stations will not come on using the controller. When we go station to station on the controller, every line either clicks, thumps, clicks with delay, and one line is even totally dead. We have rechecked/redid all the wiring, changed out some of the diaphrams and checked the solenoids. When we use the bleeder to water, they all come on fine. But when we try to water from the controller, it won't work. When we bought this house over 10 years ago, the controller was all ready here and worked fine.....

Does this sound like the controller needs to be replaced?

Please....I would really appreciate any ideas and help on this issue :) I