You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2939 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, May 6th 2010, 2:34pm

by Wet_Boots

Power down the SRC and remove the battery. Then start over and program it from scratch. If no good, then the controller could be shot.

Wednesday, May 5th 2010, 5:29pm

by DRegs (Guest)

Hunter SRC won't control pump

Hey guys. First off I'm no expert so if I sound off on some of my descriptions I'm sorry =) I bought this house around 8 years ago and the sprinklers have worked fine. Over the Winter it looks like the battery that controls the Hunter Src died. I replaced the battery and when I went to run the sprinklers I got a NO AC message. I finally figured out that the actual wall outlet had gone bad. So right now I have the SRC and the pump plugged into a different wall outlet. When I plug in the pump it turns on automatically. The SRC doesn't control it anyone like it used to. What am I missing here? Any help would be fantastic. Thanks all!