You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1594 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, May 8th 2010, 5:07am

by Wet_Boots

Not true.

Wednesday, May 5th 2010, 8:00am

by Rtrain82 (Guest)

1/2 to 3/4

I just moved into a house where all the heads are broken. I pulled out some heads and it looks like the line is 1/2 inch outlet but then they used a convertor to go from 1/2 to a 3/4 for the head.

Wouldn't going from 1/2 waterline to 3/4 head not give it the proper pressure it needs? It seems like if the waterline has a 1/2 inch outlet I should use a smaller head that is made for that size.