You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2967 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, May 11th 2010, 9:43am

by Old Guy

taken from anoter thread;

Also, note that there is banging when the zone is first opened, and that is not water hammer. It is something of an oscillation you can sometimes see when a system is first opened in the spring, where there is no water in the zone for the supply to 'push' against. When it happens on a recurring basis, you look to make changes. Installing check valves in the heads is one obvious choice nowadays, to keep a zone full of water, so there's something to 'push' against. Throttling down a zone valve flow control is another option. Changing zone valves is another.

Friday, April 30th 2010, 6:39pm

by Istorch

knocing noise

When turning on sprinkler from timer box you hear water go on then a bang in the pipe. It then goes on each zone ok and shuts off ok just starting up. Also if the water pressure is to high entering a system can it also cause a banging noise in the pipe .