You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1609 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, April 24th 2010, 5:58pm

by Wet_Boots

You can replace the S600PC2.5 with a Toro Super700 PC 3.0, but the new head will be about an inch taller than the old one. The S700 is an exact-fit replacement, since the two heads use the exact same body (in the event that the old body won't unscrew easily)

-

Otherwise, do some digging and install any (even taller) modern rotor with a 3 gpm nozzle.

Saturday, April 24th 2010, 4:24pm

by sprinkler600

Toro 600 replacement of rotor

I have a toro 6oo sprinkler system installed. I need to replace some of the rotors specifically one by model number s600-pc25. What rotor can that be replaced with?