You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1601 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Friday, April 30th 2010, 8:37am

by Old Guy

Well what do you know... lol Yep the 205 will fit that..

Follow - Up FYI



I bought 6 Irritol 205 sf valves from this site.... They fit the old Richdel 205 APRs perfectly.

I swapped the top and guts for all in about 2 hrs and rewired same. 100% fuctioning



So tks agn for the good advice...



Tom

Thursday, April 15th 2010, 1:56pm

by Old Guy

thanks for the help... I was hoping not to have to pull it all apart.



And I see the web site sells them :)



tks agn

Tom

Thursday, April 15th 2010, 7:48am

by Wet_Boots

Good on you for looking to add flow control to the old valves - it will maximize diaphragm life.

Wednesday, April 14th 2010, 9:36pm

by mrfixit

Well what do you know... lol Yep the 205 will fit that..

Wednesday, April 14th 2010, 6:52pm

by Old Guy

Label on valve is Richdel 205 APR...silver sticker center cover,.. to my knowlege it isn't a anti-syphon valve.
Typical 8 screws with s-steel half-moon clips under the screws on each half side.

[attach]19[/attach]

I'll get a pic if needed, but looks just like the Irritol 205 S. ( simple 1" inline valve ) Attached pic is the Irritol 205 S

Wednesday, April 14th 2010, 1:31pm

by mrfixit

I'm pretty sure APR is an anti-syphon valve. If you mean the 711APR then yes the 205 parts will transfer over.

A picture would help. Here's a hint when swapping out the parts. Change them all at the same time. Meaning bonnet, spring and diaphragm. This way makes life easier trying to get the diaphragm on just right. Have the diaphragm held into place with the screws.

Wednesday, April 14th 2010, 12:08pm

by Old Guy

Replace Richdel 205 APR valves

I have 6 Richdel 205 APR valves that are coming to the end of life...



Can I just pull the top of the Richdels off the body and swap the top of the Irritol 205 SF for new guts and solenoid??



That of course would save lots of work! :)



Tks in advance

Tom