You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2987 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, April 13th 2010, 9:39pm

by HooKooDooKu

First of all, even if you only have a 3/4" line comming into the house, you might have a 1" service line in the yard you can tie into. That's the case for me. 1" PVC from the meter to just outside the house, then transistions to 3/4" copper just before coming into the house.

Second, when it comes to irrigation, larger pipes just mean less resistance and therefore less pressure loss while travelling through the larger pipes.

We're not talking about sausage where you push it through a 3/4" grinder and it stays 3/4" when you move it into a 1" pipe. Water is a fluid operating under pressure. The water goes where ever the pipe will let it. Think of it this way, your hose bibb operates by opening and closing a openning that is about 1/4" is size, but you don't notice that being a problem feeding a 1/2" hose do you?

Tuesday, April 13th 2010, 10:52am

by xxxvwxxx

Design question. . .

So I went to rainbird and did the design system. As most houses I have 3/4" service line coming into the house. Rainbird has me tapping off the house line with a 1" pipe and 2 zones are 1" and 2 are 3/4". I was curious if the 1" lines would work coming off 3/4" supply. Any info would be much appreciated. thanks.