You are not logged in.

  • Login
  • Register

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1144 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, April 1st 2010, 9:48pm

by ldcxyz

If this system is on a well. You might want to check the GPM and see if it has dropped. We are facing this all the time because of dry conditions and low water tables. If this is the case, you can hope that smaller nozzles will solve the problem, or else its a new pump or redisign of the system.

Tuesday, March 30th 2010, 1:59pm

by mrfixit

The first thing I would look for is a pressure regulator. If that spring inside breaks then there
will be low pressure on all zones.

Every once someone hasn't turned on a shut off valve all the way as Todd mentioned.
Could be at the water meter.

Tuesday, March 30th 2010, 7:07am

by hi.todd

Could be a Master Valve malfuncioning, you can check your timer in the terminal strip for a wire on MV.

Could be the Backflow is not working correctly.

Could be the water source is not open all of the way.

:thumbsup: :thumbsup:

Tuesday, March 30th 2010, 5:23am

by red24

loss of pressure

I am pretty sure i don't have any leaks, but there is not enough pressure to push up sprinkler heads and water the entire yard. could my main valve be bad (sprinlers have lost pressure at ever watering station)