You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3352 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, March 17th 2010, 8:45am

by ldcxyz

Go with the 4 in the corners as long as you can use as least a size 6 nozzle (2.7 gpm) with your water supply.

Tuesday, March 16th 2010, 3:19pm

by Wet_Boots

A fifth rotor in the center of a square would spray a shorter distance, so as to not waste water overthrowing the boundaries. Umless you have a lot of wind when you water, it wouldn't serve much purpose.

Sunday, March 14th 2010, 9:08pm

by Juan54

Hunter rotors

I'm designing my sprinkler system and my front yard is 32 feet wide from the neighbor's driveway to our driveway and 30 feet from the house to the road.I was thinking about installing four of the Hunter PGP-ADJ 4 nch sprinkler heads one in each corner.Is that enough or should I install a fifth rotor in the center of the yard that will overlap the four corner sprinklers ?( ?(