You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3003 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, February 3rd 2010, 1:31pm

by mrfixit

The valve should function just fine. I've seen 100 valves installed this way. Never the valve in question though. Will your install be up to code? I have no idea.

Wednesday, February 3rd 2010, 1:05pm

by casey0999 (Guest)

Mounting valve at 90 degree angle?

Hello, regarding a valve such as the Hunter PGV-100GS: Is it necessary to mount this valve, or a similar valve, with the solenoid vertically (ie perpendicular to the ground), or is it also ok to mount it with the solenoid horizontal (ie parallel to the ground). This is an indoor application, and I have limited clearance above the valve.