You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4852 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, August 8th 2005, 10:36am

by RidgeRun05

There really is no way of locating irrigation pipes. The utility companies using tracing wires or other means to tag their utilities. Without a drawing, you are probably going to have to go with the hit / miss method. You can locate the irrigation wires with a wire tracing device.

Monday, August 8th 2005, 4:58am

by Vespidie

locating sprinkler system irrigation lines

I recently purchased a home with an irrigation system, however the seller couldn't locate the drawing showing the system layout. I was told the system hadn't been used in about 2 years also.

Not being familiar with irrigation systems, can the layout be "located" similar to the public utilities before one digs?

If the system can't be located by automatic means, I assume that the "hit and miss" method of location is my only alternative.