You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3205 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Wednesday, September 9th 2009, 8:55pm

by rainman016

15 years you say?

Definitely Replace the controller.

Wednesday, August 19th 2009, 5:52am

by gee


Thank you.

Might be cheaper to buy a new unit as the controller is already very old.


Monday, August 17th 2009, 7:44pm

by Wet_Boots

You might consider a repair service. This controller uses line voltage and soldered connections.

Saturday, August 15th 2009, 7:36am

by gee

Replace Microswitch

Can you plese let me know where exactly the microswitch is located.

Thursday, August 13th 2009, 3:26am

by Wet_Boots

Replace the failed microswitch.

Wednesday, August 12th 2009, 8:53pm

by gee

Imperial Valet Timer

I have an Imperial Valet Timer. It was working well for over 15 years. Since last week in the Auto mode the timer and the day dials work but the station dial does not buge at the set time the sprinklers do not come on. If I move the station dial beyond the off position manually then the dial moves automatically to station #1 and the sprinklers come on and the unit cycles through all the stations as programmed.

I reset day and time etc but no luck. Any help will be very welcome.