You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1827 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, July 29th 2009, 11:51pm

by HooKooDooKu

It depends upon what you want to water. If you are just doing drip irrigation, then a hose bibb is just fine. But generally speaking, large volumes of water are needed for irrigating a yard. A hose bibb has the limitation that is most likely is fed by a 1/2" water line. That's just too small for anything other than drip irrigation.

As an example, a typical irrigation circuit will have about 7 to 10 sprays, each spray requiring about 30 psi of working pressure spraying about 1 gallon of water per minute. That means you need a source that can produce about 10 gallons of water per minute. But a 1/2" hose can only supply about 5 gallons per minute (if forced to produce more because of high pressures, then you start getting into issues with water hammer).

Monday, July 27th 2009, 4:28pm

by happycats

Can auto/valve system run off external faucet as source instead of tapping main line?

Hi - in process of designing system that can have zoned controls (valves, right?) and run off a timer. I was trying to figure out if you can use the external house faucet as the water source rather than tapping into the main line. All the systems I see described seem to all involve tapping into the main line. Is that a must? ?(