You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1972 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, July 28th 2009, 5:40pm

by AdamT

I ordered the PVB yesterday. I checked with one of the plumbers at work and he recommended using CPVC and anchoring it to the house. Much cheaper and I wasn't looking forward to soldering next to my gas meter anyway.

Adam

Monday, July 27th 2009, 3:11pm

by Wet_Boots

Just get the PVB and mount it high enough to be effective. Or consider using a row of antisyphon valves next to the house, also elevated properly.

Saturday, July 25th 2009, 7:29pm

by AdamT

Is this OK to use as a backflow device?

I am still trying to install a sprinkler system using as much of the original system(destroyed by previous owners) as possible. This was installed at one of the original 1" taps. It is a Strataflo 352 check valve with 1/4" taps on both sides of the valve.


I think it was originally installed right before this spigot


Is it a valid backflow device, it would be 16" - 20" below the highest sprinkler head.

I want to do this system properly, but I got a little freaked out when I went to get a $100 PVB and then realized that I would need at least $70 worth of copper pipe and fittings to adapt it to my system. I thought that the price of copper had come down, $28 for a 10' stick of 1" copper is more than I was expecting.

Adam