You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3257 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, July 22nd 2009, 5:46am

by Wet_Boots

It looks like there are two valves there, so you might want to consider something more conventional, if cost is a factor. Antisyphon valve is the proper replacement, if located at the proper elevation.

Tuesday, July 21st 2009, 8:51pm

by n3w813

Ok thanks for the help. I think this will be the way to go then. :)

Tuesday, July 21st 2009, 11:29am

by mrfixit

The Dig valve should do what you're trying to do. If you use good 9 volt batteries they should last a year without any problems. The Energizer Industrial 9 volt battery is an excellent battery. I have 7 Dig valve adapters installed at a customers house for the past 5 years or so. We did have the batteries die a couple of times within a year but the rest of the batteries easily lasted the year. The customer now has me install new ones every 6 months which leaves me with quite a collection of still usable 9 volts.

One idea about installing the new valve. If for some reason it's tricky to get that old gate valve out of there you could just open the valve and leave it where it is installing the new valve somewhere else.

Tuesday, July 21st 2009, 9:46am

by n3w813

Installing a sprinkler timer

Hi, I am wanting to install a sprinkler timer to my existing system.

I am thinking that its as easy as removing the valve I use to it on now (As seen in the picture below) and replacing it with the timer found at:


Is this correct? Also how long does a 9v battery usually last in a controller like that?

Thank you,