You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1869 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, September 12th 2009, 8:43pm

by debo

RE: replacing heads

Thanks! Yes, I just want to unscrew the whole head and screw a new one on.
The above post by "wor.." is right...Most installers of sprinklers make it out to be more then it is...Money maker....I have installer paying 60 to $80 to replace simple PGP ($5) heads...BONG

Tuesday, July 21st 2009, 9:42am

by tostrander (Guest)

replacing heads

Thanks! Yes, I just want to unscrew the whole head and screw a new one on.

Tuesday, July 21st 2009, 9:18am

by worachj

If you want to replace the sprinklers internal assembly you will need to dig and remove the dirt around the top of the sprinkler head so that you can unscrew the internal assembly and remove it from the sprinkler body. Changing the sprinkler nozzle is much simpler.

These links should help.

PGP Rotary Sprinklers Installation and Adjustment Instructions
http://www.hunterindustries.com/Support/Installation_Adjustment/Rotors/pgpinstruct.html

PGP-ATR Rotary Sprinkler Installation and Adjustment Instructions
http://www.hunterindustries.com/Support/Installation_Adjustment/Rotors/pgpatrinstruct.html

Tuesday, July 21st 2009, 6:56am

by tostrander (Guest)

replacing heads

Hi, never replaced a head before. I was told you turn the system on and then grab the head when it pops up and turn the sytem off and dont' let it retreat and then simply unscrew the old and screw the new on. Is this accurate. We have Hunter PGP heads