You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3377 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, July 19th 2009, 11:02am

by Wet_Boots

You could just replace the entire valve.

Saturday, July 18th 2009, 7:58pm

by themickel

First the valve wouldn't turn on, now after solenoid replacement it won't turn off

About a month ago we replaced the controller on our old TORO system. Afterwards I noticed one of the 6 zones was no longer coming on. After checking the wiring (no problems there) I decided it must be the solenoid. So I replaced it. But now I have the opposite problem: the zone with the new solenoid won't turn off.

Any suggestions? Thanks for your time.