You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3414 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, July 17th 2009, 4:05am

by Wet_Boots

Remove the valve. Do the work, and you get a spare zone valve. It isn't that difficult.

Thursday, July 16th 2009, 9:58pm

by TennChris

How to change a valve (to not be a valve) and to always allow flow

I am changing the configuration (adding on) to my irrigation system. I have a RainBird DV valve which now is not needed and in fact I want it to NOT be a valve any more and to always allow flow and for that line after the valve to remain pressurized.

I don't want to remove that valve from the system (at least not yet) because it would be a real time-consuming nuisance. ;(

Will removing the internals of this RainBird DV valve do the trick for me? Exactly what do I remove?



PS. I have never opened up a valve before so I am a newbie at it.