You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4718 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Monday, July 25th 2005, 1:36pm

by Wet_Boots

The type of backflow preventer you have will do that at high pressure, which is why they are installed outdoors. It is not a malfunction. You can see the discharge after each zone valve shuts off.

Monday, July 25th 2005, 12:43pm

by GMillas

Febco 825Y the problem?

I have high water pressure (120PSI) and I keep hearing what sounds
like a pressure relief valve blowing off momentarilly. Could the 825 be responsible for this? It is rated for 140 PSI could it need a rebuild? Has anyone experienced this before. It just did it again even with the sprinkler on?