You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1986 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, July 11th 2009, 11:59am

by mrfixit

You'll get a variety of answers on this question. I prefer the Hunter line of controllers. Number one they're reliable. Number two they're easy to understand and program. Indoors I recommend the Hunter Pro C Plus. If you can't program that controller then you probably can't tie your shoes either. Outdoor I recommend the Hunter Pro C. Also simple to program.

The SRC comes in 6 and 9 stations.

http://www.sprinklerwarehouse.com/Hunter-SRC-Controllers-Timers-s/84.htm

The Pro C comes as a 3 station controller. You need to add modules to expand that number. Easily done. Simple as changing a lightbulb.

http://www.sprinklerwarehouse.com/Hunter-Pro-C-Series-3-Station-Indoor-Controller-Timer-s/83.htm

Saturday, July 11th 2009, 9:06am

by melprint

Controllers are sticking in the on position

I have 2 zones that will come on OK but do not turn off. If I tap the controller box it will tun off.
So it is just getting stuck. Is it possible to pull the controller and re-build or do I need to just replace the controller? I did not install this system, so is there a better brand of controller that I can use if I am going to replace?