You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2991 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, February 13th 2011, 6:12pm

by barry123456 (Guest)

buttress adapter

Friday, July 3rd 2009, 11:37pm

by Wet_Boots

You need to have "postable" photographs, and you can't depend on websites to do your image editing. The most common free image editor for Windows PC's is Irfanview and tutorials abound for it.

Thursday, July 2nd 2009, 3:24pm

by scherfarm

Hello Wet Boots,

Thanks for the reply, but I can’t post the pic, too large.

The valve that I’m trying to adapt to is a Schutz with the following numbers stamped into the handle: 0335 03071 1011345511.

I measured the threaded side of a cap that came with the tote, it measures 60mm across… I’m assuming this is a NW50 / DIN61 / S60 buttress (?) since the tote came from Germany….

any chance there's an adpater available to NPT?

Wednesday, July 1st 2009, 5:47am

by Wet_Boots

Take a photograph

Tuesday, June 30th 2009, 12:07pm

by scherfarm

2" buttress adapter needed

I have an IBC (International Bulk Container) with a 2” male buttress at the outlet. I see several buttress connectors on you site, but they don’t give the dimensions (or they reference 1”)

Do you have any 2” female buttress to NPT or slip adaptors?

If yes, pls send me a link or Part Number.

Thanks in advance,