You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4153 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Sunday, May 18th 2003, 11:58am

by Rays Sprinklers

Also check for a leak in that zone

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Sunday, May 18th 2003, 11:56am

by Rays Sprinklers

Can you tell me what heads zone three has and what heads zone 2 or 4 has. What is the nozzle size on 3, and 2 and lets say 4. I can help you if you give me that information. Zone three is using alot of water and its taking a while to build up back pressure, and the PVB thinks something is wrong or there is backflow so it kicks out.

Hope that Helps
Please reply

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Friday, May 24th 2002, 3:27am

by SprinklerGuy

Sounds like your 3rd zone may be using alot more water than the rest, causing a drop in pressure like that to cause the poppet to drop and leak. I would check zone 3 for leaks or ways to use less water with that zone.

Is zone 3 quite a bit different in terms of types of heads or numbers of heads on it?

Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net


Thursday, May 23rd 2002, 4:08pm

by MHatala

Backflow Preventer

I have a Toro backflow preventer that gushes water out of the top every so often. I have to shut the water off and then turn it back on in order to get it to stop. This happens every so often on my third zone. The other six zones are fine. The system is only 5 years old and it only started last season.

Is there a reason or a cure?