You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3289 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, June 18th 2009, 1:29pm

by Wet_Boots

If the ratcheting is audible, then you probably have a full-circle-only head. By sight alone, you can distinguish one from the other by the color of the 'peg' in the body, once the nozzle is removed. Blue is full-circle-only, Red is adjustable part-circle.

Wednesday, June 17th 2009, 3:46pm

by Henry

It came with a black head, the previous one was grey.
When it is popped up and spraying, I can rotate it in one direction but not the other. I can feel a mild rachetting/clicking sensation as I turn it.
Does this info help any, I hope?

Wednesday, June 17th 2009, 12:25am

by Wet_Boots

What size nozzle in the head? Can you free-wheel the head while it's popped up? Don't force it, but it is possible to hang up the gear drive on these heads, if you freewheel it to near the reversing point.

Tuesday, June 16th 2009, 4:49pm

by Henry

Toro Super 700 won't rotate

I have had several Toro Super 700s in my yard for 10+ years. One would spray but not rotate when I turned the system on this spring. I purchased a new one from Sprinkler Warehouse, removed the old innards and replaced with the new innards. I went through the arc adjustment directions, but the new one won't rotate either. What am I doing wrong?
Thanks in advance.