You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1885 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, June 1st 2009, 8:52am

by HooKooDooKu

While I'm not so sure about rotors, if you have spray bodies and a little extra working pressure, you can get spray bodies with 30psi pressure regulators built into them. This was my solution for a system that starts with about 70psi static water pressure using MPRotators.

Monday, June 1st 2009, 5:46am

by Wet_Boots

If you have rotor heads, change nozzles to redistribute water.

Sunday, May 31st 2009, 10:13pm

by ruslkauf515

Pressure

It seems that I get less pressure at the sprinkler at the end of zone--farthest from control valves--leaving an area with less water distribution. How can I be sure of equal pressure at all sprinkler heads? ?(

ruslkauf515