You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3368 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Friday, September 2nd 2005, 5:41pm

by Jazzer K

hunter make a direct replacement for a PGP or I-20 to fit into the casing on any impact sprinkler.

Thursday, July 14th 2005, 5:42pm

by Wet_Boots

The missing information is what kind of Rainbird impacts are not turning. Minipaw or Maxipaw types can be replaced with the Maxipaws, and no digging required, if you use the service wrench. The older brass-impact-in-a-plastic-case heads are more cheaply replaced with rotors.

Thursday, July 14th 2005, 5:09pm

by bobw

In general, the world has moved on to rotors. The only real reason to use impact sprinklers in a new situation would be if you are using "dirty" water. The impacts tend to handle pond water, etc much better than rotors.

Thursday, July 14th 2005, 2:51pm

by Robbies

i would do the same thing. maybe sand got in them or just wearing out. Maybe use stainless steel. It might hold up better against the sand

Tuesday, July 12th 2005, 6:48pm

by RidgeRun05

I would suggest replacing them with gear driven rotors. Hunter or Rain-Bird both make excellent gear drives.

Sunday, July 10th 2005, 7:33pm

by TYGVR

sprinkler not turning

I hav had a couple of rainbird impact sprinklers not rotating. what could cause this? If I click the weight they start working again but stop after a while. Fixable or replace? Replace with impact or rotors?