You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3320 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 20th 2009, 12:33pm

by HooKooDooKu

I'm guessing that you're not getting many responces because you are talking about designing something that's a bit bigger than the average lawn irrigation system, and you are not asking a specific question (it's more of a "what's everything I need for this huge system?" sort of question).

I would suggest that you read the material available at Then come back here and aske specific questions.

BTW, there is a catagory specifically set aside for help with system designs.
But you've posted this design related question in the Misc catagory.

Monday, May 18th 2009, 5:54am

by sitsue

New System


I want to put my own system in to water my fruit trees(apple, peach, and pare) and all my berry plants (rasberry,blueberrie.strawberry,grape) my trees and plants are set out in side by side rows 75' long and 12' apart for a total of 6 rows. My water source is 50gal/min +. From my pump to the middle forward start of the 6 rows is approx 250'. I figured i'd run one line to forward middle start of rows, than tee off left and right and than install other tees to run up the middle of each row to a pluged end. My water pressure is 60lbs to an adjustible 90lbs. I would like info on this system. I don't want the less expensive material , something around the avg will be fine. what size poly piping,sprinkler heads , what kind and how many,ect,ect. I know this is a large request but I was told this was where to ask.