You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3329 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, May 13th 2009, 7:50pm

by mrfixit


If the controller is activating the solenoid but the valve isn't coming on it's probably the diaphragm. Could be a clogged port or the flow control could be turned off.

Wednesday, May 13th 2009, 5:22pm

by Jimemteach

One zone not working

The last zone of a Rain Bird 12 zone system stopped working recently. I replaced the solenoid and that didn't make any difference but I noticed that when I opened the bleeder screw on the valve the zone worked fine. Any help would be greatly appreciated. ?(