You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1965 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 10 posts

Monday, May 4th 2009, 10:25am

by skom

OK, OK, no more question about pipe size (btw. in Poland we use inches in pipes too!, not metric!)
Thank you for the hint about antisiphon valve.

Monday, May 4th 2009, 7:09am

by Wet_Boots

Antisyphon valves are for flat properties, where the valve can be a foot higher than any sprinkler head it feeds. There is only one rock-solid choice for an antisyphon valve, and that is the Irritrol 2713APR (or 2711APR, with 3/4-inch connections) - it has the longest history of trouble-free operation, and will be repairable forever.

-----------------------------------------------------------------------------------

Understand that we don't use the metric system in the US, so whatever you order might not thread onto European fittings.

Sunday, May 3rd 2009, 10:29pm

by skom

Thank you hi.todd :)
1. To make the backflow prevention I have only to change the valves from SRV-101G to ASV-101 (if I decide to prevent by using antisyphon)?
2. Maybe sombody could help me to choose the body for MP Rotator - Hunter PROS-04 or RainBird 1804. (I decided to buy sprinklers, bodies for them, controler and rain sensor in www.sprinklerwarehouse.com - it's about half price than in Poland) :)
3. What shall I do if I want to instal automatic valve for winterization shall I use only one pc of "end lateral line drain" (http://www.sprinklerwarehouse.com/Blazing-END-OF-LATERAL-LINE-DRAIN-p/hp1600.htm) for one zone (totaly I will need 3 pcs for my design ˜— see pic from my first post) or maybe several for one zone - e.g. for each end of pipe (totaly about 16 pcs). And now again about the sizes od pipes - this "end of line drain" is 1" - will it fit to 1" PE tubing (http://www.sprinklerwarehouse.com/14-011-Polyethylene-Tubing-1-p/14-011.htm) or to 1 1/4"?
Best regards skom :)

Sunday, May 3rd 2009, 9:18pm

by hi.todd

In The United States we pretty much stick to the IPS or Iron Pipe Size. I am not sure who can answer your questions
on the pipe sizing. If elevation is not an issue you could leave your valves the same and install a pressure vacuum
before any of your valves. The only catch is that you have to install it 12" taller than any of your sprinkler heads.


Good Luck :thumbsup:

Sunday, May 3rd 2009, 12:32pm

by skom

Thank you for praising me for the layout :)
To make a backflow prevention do I have to change valves from SRV-101G to ASV-101? Is that all?
What about sizes of pipe and fitting from my previous question?

Sunday, May 3rd 2009, 7:25am

by drpete

What is your water supply? You wouldnt need backflow if its a pond or a stream. If its a well or city water then yes youll need backflow. I have to commend you on your awesome layout and thought you put into your design. It looks very professional

Saturday, May 2nd 2009, 10:48am

by skom

Thank you for hints :)
And now "technical" question - the size of PE pipe is outer diameter, and size of barbed polly fiting (for this pipe) is outer too or mayby inner? eg. PE pipe is 1" - couple polly for this pipe is 1" or 3/4"?
Thanks in advance :)

PS. on Polish "tutorials" nobody writes about backflow :(

Saturday, May 2nd 2009, 4:48am

by Wet_Boots

Looks okay from here, once you include a backflow preventer.

Friday, May 1st 2009, 4:43pm

by hi.todd

nice job. you will need some type of backflow device.

first time eh.

you maybe a natural..

:thumbsup:

Friday, May 1st 2009, 1:51pm

by skom

Irrigation design

Hallo
I live in Poland and by coincidence I came accross your forum on the irrigatin system and I got inspired by what you write so I decided to set up such an irrigation system in my garden. After having read numerous publications on how to make an irrigation system on one's own I designed the project presented below:

PLease give me some pieces of advice what needs to be changed and what errors I made. I wonder if the number of 37 sprinkles for the area of 4300 square feet is sufficient. In case of any doubts feel free to ask me for further clarification.

P.S. here is the link to the pdf file of better quality#mce_temp_url#