You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2029 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, May 9th 2009, 9:13pm

by Candance

RE: Toro Remote Control

Pat
Toro are usually pretty good about honoring their warranty. I would check and see if there is a local Toro distributor
in your area. Not a retail store like Ace Hardware but a wholesaler. They usually have a counter where the will
serve retail customers. Take the remote control into them and explain the problem. Toro date codes everything
so they should be able to tell you if it is still under warranty.

Tuesday, April 28th 2009, 10:31am

by PSpatches

Toro Remote Control

We have the Toro Remote kit for our sprinkler system. After this winter the remote no longer works. We replaced the battery and did all the troubleshooting. We thought it may have died so we purchased a new kit. The same thing happens with the new one. When you try to make a zone work, the number comes on the remote and very fast the sprinkler icon comes on and goes right off. The zone does not work. This remote plugs into the controller with a phone jack plug. Could it possibly be the jack in the controller that has gone bad? The controller works fine manually and timed.
Any help would be appreciated.


Thanks, :(

Pat