You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3361 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, April 7th 2009, 4:06pm

by HooKooDooKu

Dura manifolds are designed to be tightened by hand. So I would assume you want it firmly tight... but not necessarily as tight as you can tighten it.

Tuesday, April 7th 2009, 11:24am

by Fred

Dura Manifolds How Tight

I am installing a dura manifold and my question is how tight do I tighten the valve take off fitting?:?: I do not want to damage the O-Rings.