You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5485 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, May 17th 2003, 2:18pm

by Rays Sprinklers

Sometimes the PVB's do that. I would turn the water off at the first ball valve on the Backflow, then shake the backflow a little, and tap the top. Then shut the other valve (both off) and quickly open the first valve until it seals (go back and forth) once it seals you ca slowly open the other. If this works fine! If you had the system installed call your contractor. If not you may need to visit an irrigation dealer for help!

Rays Above and Beyond Automatic Lawn Sprinklers

Sunday, May 12th 2002, 6:24pm

by steve

Backflow preventer

I have a Febco vaccuum pressure breaker. When I try to run water through it always leaks out of the top. Is this because I don't have it level? It's not that far off. I have checked the parts inside and everything seems to be OK.